Herunterladen Inhalt Inhalt Diese Seite drucken

Transferring Calls; Call List; Open Call List - AGFEO T 18 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

AGFEO T 18

Transferring calls

If your AGFEO T 18 is operated on a PBX, you can transfer calls to other participants:
– During a call.
– Press the "R" button (
– Dial the number for transfer using the keypad.
– If the transfer number is engaged, you can retrieve the call by pressing the "R" button
(
) twice.
– Announce the call to the transfer recipient or replace the receiver and the call is trans-
ferred.
WARNING:
To ensure functionality of the "R" button (
"short" (see page 28).

Call list

Your telephone has a call list for up to 50 incoming calls stored with dates and times. If the
number of the caller is transferred during a call, this will also be displayed. If the telephone
number matches one from the local phone book or a direct speed dial number of the T 18,
the caller name will also display. If there are new, unanswered calls in the list, this will be
displayed in the initial state ("NEW" on display). Telephone numbers from the call list can be
dialled directly. Individual entries or the entire list can be deleted. Telephone numbers can
be transferred into the phone book.
WARNING:
The call list is set up as a circular buffer. If the call list is full, therefore, the oldest entries
will be automatically replaced.
CLIP data monitoring is done in the following sequence: For an incoming call, the telephone
number is checked for a match with the direct speed dial numbers. If there is no match, the
phone number is compared with the local phone book on the T 18. If this too produces no
match, the name (if any) associated with the CLIP information is displayed.

Open call list

– In standby, press the left navigation button (
– Use the up/down navigation buttons (
– Unread entries are marked "NEW".
– To transfer a phone number into the phone book, press and hold the "Phone book" button
(
) for at least 3 seconds.
– To delete the displayed call from the list, press the "Del" button (
by pressing "Ok" (
– To delete the entire list, press and hold the "Del" button (
then confirm by pressing "Ok" (
– To call an entry, either lift the receiver or press the "Loudspeaker" button (
30
). The call is put on hold.
), the entry is deleted.
).
) on an AGFEO PBX, flash time must be set to
) to open the call list.
) to scroll between the individual entries.
) for at least 3 seconds and
). After confirming
).

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

T18

Inhaltsverzeichnis