Beckhoff CB3060 Handbuch Seite 86

Kapitel: BIOS-Einstellungen
5.4.2.2 NB PCIe Configuration
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ NB PCIe Configuration
│ PEG0
│ PEG0 - Gen X
│ PEG1
│ PEG1 - Gen X
│ PEG2
│ PEG2 - Gen X
│
│ Run-time C7 Allowed
│ Enable PEG
│ Detect Non-Compliance Device
│ Program PCIe ASPM after OpROM
│ PEG0 De-emphasis Control
│ PEG1 De-emphasis Control
│ PEG2 De-emphasis Control
│ PEG0 - ASPM
│ ASPM L0s
│ PEG1 - ASPM
│ ASPM L0s
│ PEG2 - ASPM
│ ASPM L0s
│ PEG Sampler Calibrate
│ Swing Control
│ PEG Gen3 Equalization
│ Gen3 Eq Preset Search
│
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
 PEGn - Gen X
Optionen: Auto / Gen1 / Gen2 / Gen3
 Run-time C7 Allowed
Optionen: Disabled / Enabled
 Enable PEG
Optionen: Disabled / Enabled / Auto
 Detect Non-Compliance Device
Optionen: Disabled / Enabled
 Program PCIe ASPM after OpROM
Optionen: Enabled / Disabled
 De-emphasis Control
Optionen: -6 dB / -3.5 dB
 PEGn ASPM
Optionen: Disabled / Auto / ASPM L0s / ASPM L1 / ASPM L0sL1
 ASPM L0s
Optionen: Root Port Only / Endpoint Port Only / Both Root and Endpoint Ports
 PEG Sampler Calibrate
Optionen: Auto / Disabled / Enabled
 Swing Control
Optionen: Reduced / Half / Full
 Gen3 Equalization
Optionen: Disabled / Enabled
Seite 86
Not present
[Auto]
Not Present
[Auto]
Not Present
[Auto]
[Enabled]
[Auto]
[Disabled]
[Disabled]
[-3.5 dB]
[-3.5 dB]
[-3.5 dB]
[ASPM L0s]
[Both Root and Endpo...] █│+/-: Change Opt.
[ASPM L0sL1]
[Both Root and Endpo...] ░│F2: Previous Values
[ASPM L0sL1]
[Both Root and Endpo...] ░│F4: Save & Exit
[Disabled]
[Full]
[Disabled]
[Enabled]
Beckhoff New Automation Technology CB3060
▲│Configure PEG0 B0:D1:F0
█│Gen1-Gen3
█│
█│
█│
█│
█│
█│
█│
█│
█│
█│
█│────────────────────────────────│
█│→←: Select Screen
█│↑↓: Select Item
█│Enter: Select
░│F1: General Help
░│F3: Optimized Defaults
░│ESC: Exit
░│
░│
░│
▼│
Chipset
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│