Kapitel: BIOS-Einstellungen
5.4.1.2
USB Configuration
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│
USB Configuration
│
│
USB Precondition
│
XHCI Mode
│
BTCG
│
│
XHCI Pre-Boot Driver
│
│
Route USB 2.0 pins to which HC?
│
USB 2.0 PIN #0
│
USB 2.0 PIN #1
│
USB 2.0 PIN #2
│
USB 2.0 PIN #3
│
USB 2.0 PIN #4
│
USB 2.0 PIN #5
│
USB 2.0 PIN #6
│
USB 2.0 PIN #7
│
USB 2.0 PIN #8
│
USB 2.0 PIN #9
│
USB 2.0 PIN #10
│
USB 2.0 PIN #11
│
USB 2.0 PIN #12
│
USB 2.0 PIN #13
│
│
Enable USB 3.0 pins
│
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
USB Precondition
Optionen:
Disabled / Enabled
XHCI Mode
Optionen:
Smart Auto / Auto / Enabled / Disabled / Manual
BTCG
Optionen:
Disabled / Enabled
XHCI Pre-Boot Driver
Optionen:
Disabled / Enabled
Route USB 2.0 pins to which HC?
Optionen:
Route Per-Pin / Route all Pins to EHCI / Route all Pins to XHCI
USB 2.0 PIN #X
Optionen:
Route to EHCI / Route to XHCI
Enable USB 3.0 pins
Optionen:
Select Per-Pin / Disable all Pins / Enable all Pins
USB 3.0 PIN #X
Optionen:
Disabled / Enabled
USB Ports Per-Port Disable Control
Optionen:
Disabled / Enabled
USB Port #X
Optionen:
Disabled / Enabled
USB3.0 Port #X
Optionen:
Disabled / Enabled
Seite 80
[Disabled]
[Manual]
[Enabled]
[Enabled]
[Route Per-Pin]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Select Per-Pin]
Beckhoff New Automation Technology CB3060
│Precondition work on USB host
│controller and root ports for
│faster enumeration.
│
│
│
│
│
│
│
│
│
│────────────────────────────────│
│→←: Select Screen
│↑↓: Select Item
│Enter: Select
│+/-: Change Opt.
│F1: General Help
│F2: Previous Values
│F3: Optimized Defaults
│F4: Save & Exit
│ESC: Exit
│
│
│
│
Chipset
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│