Audio Settings - Kenwood KDC-X5200BT Bedienungsanleitung

BLUETOOTH®
STATUS Shows the status of the selected device.
IOS CONNECTED: You are able to use the application using the iPhone/iPod
connected via Bluetooth or USB input terminal.
IOS NOT CONNECTED: No IOS device is connected to use the application.
ANDROID CONNECTED: You are able to use the application using the Android
smartphone connected via Bluetooth.
ANDROID NOT CONNECTED: No Android device is connected to use the application.
* Displayed only when [ANDROID] of [SELECT] is set to [YES].
Listen to iPhone/iPod via Bluetooth
You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.
Press repeatedly to select iPod BT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB input
terminal. ( 7)
• If you plug in an iPhone/iPod to the USB input terminal while listening to
iPod BT source, the source automatically change to iPod USB. Press
select iPod BT if the device is still connected via Bluetooth.
Internet radio via Bluetooth
Listen to Spotify
You can listen to Spotify on the iPhone/iPod/Android device via Bluetooth on
this unit.
• Make sure the USB input terminal is not connected to any device.
Preparation:
Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 4)
1
Open the Spotify application on your device.
2
Connect your device via Bluetooth connection. ( 11)
3
Press repeatedly to select SPOTIFY (for iPhone/iPod) or SPOTIFY BT
(for Android device).
The source switches and broadcast starts automatically.
• You can operate Spotify in the same way as Spotify via USB input terminal. ( 10)

AUDIO SETTINGS

While listening to any source...
1
Press AUDIO to enter [AUDIO CONTROL] directly.
2
Turn the volume knob to select an item (see the following
table), then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4 Press and hold
To return to the previous setting item, press
AUDIO CONTROL
SUB-W LEVEL
MANUAL EQ
62.5HZ LEVEL
to
100 HZ/160 HZ/250 HZ/
400 HZ/630 HZ/1 KHZ/
1.6KHZ/2.5KHZ/4 KHZ/
6.3KHZ/10 KHZ/16 KHZ
LEVEL
Q FACTOR
PRESET EQ
to exit.
.
LEVEL –50 to LEVEL +10 (LEVEL 0): Adjusts the
subwoofer output level.
The sound elements (frequency level, tone level, Q
factor) are preset into each selection.
LEVEL LEVEL–9 to LEVEL +9 (LEVEL
0): Adjusts the level to memorize
for each source. (Before making an
adjustment, select the source you want
to adjust.)
BASS ON: Turns on the extended bass. ;
EXTEND OFF: Cancels.
LEVEL–9 to LEVEL +9 (LEVEL 0): Adjusts the level
to memorize for each source. (Before making an
adjustment, select the source you want to adjust.)
1.35/1.50/2.00: Adjust the quality factor.
NATURAL/ROCK/POPS/EASY/TOP40/JAZZ/
POWERFUL/USER: Selects a preset equalizer suitable
to the music genre. (Select [USER] to use the settings
made in [MANUAL EQ].)
ENGLISH
Default: XX
17