Herunterladen Inhalt Inhalt Diese Seite drucken

Kenwood KDC-X5200BT Bedienungsanleitung Seite 19

Vorschau ausblenden Andere Handbücher für KDC-X5200BT:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

BLUETOOTH®
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
BT MODE
PHONE SELECT
Selects the phone or audio device to connect or disconnect.
"*" appears in front of the device name when connected.
"
" appears in front of the current playback audio device.
AUDIO SELECT
• You can only connect a maximum of two Bluetooth phones and one
Bluetooth audio device at any time.
1 Turn the volume knob to select a device to delete, then press the knob.
DEVICE DELETE
2 Turn the volume knob to select [YES] or [NO], then press the knob.
PIN CODE EDIT
Changes the PIN code (up to 6 digits).
(0000)
1 Turn the volume knob to select a number.
2 Press S / T to move the entry position.
1
Repeat steps
3 Press the volume knob to confirm.
RECONNECT
ON: The unit automatically reconnect when the last connected Bluetooth
device is within range. ; OFF: Cancels.
AUTO PAIRING
ON: The unit automatically pair supported Bluetooth device (iPhone/
iPod touch/Android device) when it is connected through USB input
terminal. Depending on the operating system of the connected device,
this function may not work. ; OFF: Cancels.
INITIALIZE
YES: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; NO: Cancels.
.
2
and
until you finish entering the PIN code.
Bluetooth test mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold
"PLEASE PAIR YOUR PHONE PIN 0000" appears.
2
Search and select this unit model name (KDC-X5***BT) on the
Bluetooth device.
3
Operate the Bluetooth device to confirm pairing.
Default: XX
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING:
HF CONNECT:
AUDIO CONNECT: Advanced Audio Distribution Profile (A2DP)
PHONEBOOK DL:
To cancel test mode, press and hold
.
Pairing status
Hands-Free Profile (HFP) compatibility
compatibility
Phonebook Access profile (PBAP) compatibility
to turn off the unit.
15
ENGLISH

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis