Cleaning And Maintenance - EuroLite AKKU UP-1 QCL Bedienungsanleitung

Decimal Hexad. Percentage S/F
0 255 00 FF 0% 100%
Decimal Hexad. Percentage S/F
0 5 00 05 0% 2%
6 55 06 37 2% 22%
56 105 38 69 22% 41%
106 155 6A 9B 42% 61%
156 205 9C CD 61% 80%
206 255 CE FF 81% 100%
Decimal Hexad. Percentage S/F
0 249 00 F9 0% 98%
250 255 FA FF 98% 100%

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
Control-channel 8 - Speed special effects
F Increasing speed
Control-channel 9 - Dimmer speed (step response)
S Control Board setting dimmer speed (nodE)
Response characteristics of LEDs
S
Response characteristics of halogen lamps, fast
S
Response characteristics of halogen lamps, less fast
S
Response characteristics of halogen lamps, middle
S
S Response characteristics of halogen lamps, slow
Control-channel 10 - Power save mode
S Control Board setting (POU)
S Power save mode, 50% power
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Feature
Feature
Feature
41/44 00100653.DOC, Version 1.0