Eurolite Ir-13 Remote Control - EuroLite AKKU UP-1 QCL Bedienungsanleitung

Pr-- Pr00-Pr30
ASC- AC00-AC99
FAdE FA00-FA99
FLAS FL00-FL99
rL-- r000-r255
GL-- G000-G255
bL-- b000-b255
UL-- U000-U255
SoUA SO.UA
LEd on/off
nodE nod0-nod4
UErn UEX.X
POU- PO-1/PO-2

EUROLITE IR-13 remote control

1
2
3
Preset colors
Switching colors
AC00-AC99 (with increasing speed)
Fading colors
FA00-FA99 (with increasing speed)
Strobing colors
FL00-FL99 (with increasing speed)
Dimmer intensity of red LED color
000 – 255 (increasing)
Dimmer intensity of green LED color
000 – 255 (increasing)
Dimmer intensity of blue LED color
000 – 255 (increasing)
Dimmer intensity of white LED color
000 – 255 (increasing)
Sound controlled mode
Display shutoff
on – display always on
off – shuts off the display after about 2 minutes
Dimmer speed (step response)
node0: Response characteristics of LEDs
node1: Response characteristics of halogen lamps, fast
node2: Response characteristics of halogen lamps, less fast
node3: Response characteristics of halogen lamps, middle
node4: Response characteristics of halogen lamps, slow
Software version
Power-save mode
PO-1 - power save mode, 50 % power
PO-2 - full power
When actuating a button, always hold the remote control in the direction of the
sensor. There must be visual connection between the remote control and the
sensor.
The remote control is supplied with a battery inserted. An insulating foil between the
battery and the battery contacts prevents the battery from being discharged during
storage. Prior to the first operation remove the foil from the battery support on the
rear side of the remote control. Otherwise operation of the remote control is not
possible.
If the range of the remote control decreases (10 meters as
a maximum), replace the battery. For this purpose, on the
34/44 00100653.DOC, Version 1.0