12.3. Ansaug-/Ausstoß und Rückführ-
ventile lockern
- Ansaugschlauch demontieren
- Ausstoßeinheit demontieren
- Ansaugventil mit Montageschlüssel durch
halbe Drehung gegen den Uhrzeigersinn
lockern.
- Ausstoßventil mit Montageschlüssel durch
halbe Drehung gegen den Uhrzeigersinn
lockern.
- Rückführventil mit Montageschlüssel durch
halbe Drehung gegen den Uhrzeigersinn
lockern.
12.3. Loosening the suction/ejection
- Disconnect the suction hose.
- Disconnect the ejection unit.
- Loosen the suction valve with the assembly
wrench by turning it counterclockwise a half
a revolution.
- Loosen the ejection valve with the assembly
wrench by turning it counterclockwise a half
a revolution.
- Loosen the recirculation valve with the assembly
wrench by turning it counterclockwise a half a
revolution.
- 55 -
and recirculation valves