elv FHT8-Set Bedienungsanleitung Seite 65

This is particularly important if more than one valve op-
erating mechanism is used or if different devices (i.e.
not a set consisting of heating control and valve operat-
ing mechanism) were purchased.
Proceed as follows to change or set the code:
• Press the "PROG" key until "Sond" is displayed.
• Use the selection wheel to select the special function
"CodE".
• To confirm your selection, briefly press the "PROG" key.
The following data are displayed:
• Use the selection wheel to select the first part of the code
(a number between "000" and "099") and confirm this se­
lection by briefly pressing the "PROG" key.
• The following data are displayed:
• Use the selection wheel to select the second part of the
code (a number between "000" and "099") and confirm
this selection by briefly pressing the "PROG" key.
MO DI MI DO FR SA SO
12
0 6
MO DI MI DO FR SA SO
12
6
0
65
24
18
18 24