Technical Data - IKEA Kulinarisk Gebrauchsanleitung

ENGLISH
Problem
The display shows an error
code that is not in this table.
Steam and condensation
settle on the food and in the
cavity of the oven.
Service data
If you cannot find a solution to the problem
yourself, contact an Authorised Service
Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Technical data

Technical data
Dimensions (internal)
Area of baking tray
Top heating element
Bottom heating element
Possible cause
There is an electrical fault.
You left the dish in the oven
for too long.
We recommend that you write the data here:
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
an Authorised Service
Centre.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
.........................................
.........................................
.........................................
Width
Height
Depth
1424 cm²
1900 W
1000 W
27
Remedy
477 mm
214 mm
418 mm