INSTALLATIoN
Alternative installation options
13.11 Pivoting appliance cover
The appliance cover can be rotated for undersink installation.
f Remove the programming unit from the appliance cover by
f
undoing the screws.
f Turn the appliance cover (not the appliance) and refit the
f
programming unit.
f Plug the set value transducer cable into the PCB (see chapter
f
"Installation / Commissioning / Initial start-up").
f Hook the appliance cover in at the top. Swivel the appliance
f
cover down onto the back panel and press it until it engages
audibly.
f Secure the appliance cover.
f
28
| DHB STi
www.stiebel-eltron.com