Before First Use - Electrolux EWC 1350 Benutzerinformation

8 www.electrolux.com
4.2 Detergent drawer
Detergent drawer has 2 separate
compartments for detergent and fabric
conditioner.
4.3 Time management Kurz -
Court / Extra Kurz - Extra Court
The programme duration can be
decreased from 10 to 30 minutes by
means of this button.
4.4 Vorwäsche - Prélavage
By selecting this option the machine
performs a prewash cycle before the
main wash phase. The washing time will
be prolonged. This option is
recommended for heavily soiled laundry.
4.5 Baumwolle Eco - Coton Eco
You can use this option if you want to
wash normally soiled cottons and
synthetic laundry and save energy at the
same time.
4.6 Spülen Plus - Rinçage Plus
This appliance is designed for saving
energy. If it necessary to rinse the
laundry using an extra quantity of water
(extra rinse), select this option. Some
additional rinses will be performed. This
option is recommended for people who
are allergic to detergents, and in areas
where the water is very soft.
4.7 Start Pause - Marche
Pause
This button allows you to start or to
interrupt the selected programme.

5. BEFORE FIRST USE

WARNING!
Remove any material from
the drum.
Run a wash programme without any
load, to clear any residues which may
4.8 Indicators
A
B
C
D
E
The light A illuminates when the machine
is performing the washing phase.
The light B illuminates when the machine
is rinsing.
The light C illuminates when the machine
is spinning.
The light D illuminates at the end of the
washing cycle.
The light E indicates if the door can be
opened:
• The light is on: the door cannot be
opened.
• The light is off: the door can be
opened.
• The light is flashing: the door can
soon be opened.
4.9 Spin Reduction Dial
By turning the spin speed selector you
can change the spin speed of the
selected programme or to select
Spülstopp - Arrêt Cuve Pleine or Kein
Schleudern - Sans Essorage option.
4.10 Programme Selector Dial
It allows you to switch the appliance
on/off and/or to select a programme.
have been left by the manufacturing
process. Pour approx. 100 ml of
detergent straight into the drum and run
a cotton cycle at 60°C. When the
programme is finished the machine will
be ready to use.