Unpacking - Electrolux EWC 1350 Benutzerinformation

22 www.electrolux.com
13.1 Lifting the machine
Be careful when lifting the machine.
Incorrect methods of lifting can cause
physical injuries and also increase the
risk of damage to the machine. Open the
door and take hold of the top inside of
the door opening. You can also lift the
machine by gripping the rear overhang of
the top.
WARNING!
Never lift the machine by
gripping it's control panel,
door, or detergent dispenser.

13.2 Unpacking

When supplied the washing machine is
packed using a number of locking
devices/packing pieces to prevent drum
and motor from damage in transit All
transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
1. Spread some of the polystyrene
packaging materials on the floor
behind the machine and then lay the
machine carefully rear side down on
them. Make sure that no hoses are
crushed in the process.
2. Remove the polystyrene base from
the bottom of the appliance.
3. Return machine to it's upright
position and remove the power
supply cable and the draining and
inlet hose from the hose holders on
the rear of the appliance.
4. With a suitable spanner unscrew and
remove the three screws and their
spacers on machine's rear.