CMi C-ABS-10,8 Li Set B Originalbetriebsanleitung Seite 52

Akkuschrauber_Arbeitsleuchte_450219.book Seite 52 Montag, 24. Februar 2014 2:58 14
GB
emission and immission levels, this cannot be
used to infer whether additional safety meas-
ures are necessary or not. Factors which affect
the current immission levels at the workplace,
include the type of room, other sources of
noise, e. g. the number of machines operating
and other processes taking place in the vicinity.
Permitted workplace values can differ from
country to country. This information is designed
to help the user to better assess the dangers
and risks.
**) The specified vibration emission value was
measured in accordance with a normed test
procedure and can be used in order to compare
one tool with another. The specified vibration
emission value can also be used for an intro-
ductory evaluation of the exposure. The vibra-
tion emission value may fluctuate from the
specified value during actual use of the power
tool. These fluctuations will depend on the way
in which the power tool is used. Try to keep
vibrations to a minimum. One method of reduc-
ing the vibration load is, for example, limiting
the length of time you work with the tool. All
parts of the operating cycle must be taken into
account for this purpose (for example, also
including times in which the power tool is
switched off and times in which it is switched
on, but is running without load).
52