Safety Information For Chargers; Service; Safety Warnings For Drills And Screwdriv- Ers; Additional Safety Notes - CMi C-ABS-10,8 Li Set B Originalbetriebsanleitung

Akkuschrauber_Arbeitsleuchte_450219.book Seite 45 Montag, 24. Februar 2014 2:58 14
• Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
• When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery termi-
nals together may cause burns or a fire.
• Under abusive conditions, liquid may
be ejected from the battery; avoid con-
tact. If contact accidentally occurs,
flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
• Do not open the rechargeable battery.
The rechargeable battery can be dam-
aged by improper handling.
• Do not expose the rechargeable bat-
tery to heat, fire, water and humidity.
There is a danger of explosion.
• Vapours may escape in case of dam-
age or improper use of the rechargea-
ble battery. Provide good ventilation
and seek medical assistance in case
any symptoms occur. The vapours can
irritate your respiratory tract and cause ill-
ness.
• Never attempt to charge non-
rechargeable batteries. There is a dan-
ger of fire and explosion.
• The rechargeable battery may only be
used in conjunction with this electrical
tool. Other electrical tools can overload
and hence damage the rechargeable bat-
tery.
• Only chargers approved by the manu-
facturer with the values stated on the
type plate of the rechargeable battery
may be used. The use of deviating
chargers can pose the risk of injuries and
material damage caused by exploding
batteries.

Safety information for chargers

• Keep the charger away from rain and
wet. The risk of electric shock increases
if water penetrates a charging device.
• Keep the charging device clean. Soil-
ing involves the danger of an electric
shock.
• Check the charging device, cable and
plug before each use. Do not use the
charging device if you detect any dam-
age.
• Do not open the charging device your-
self and only have it repaired by quali-
fied professionals and only with origi-
nal spare parts. Damaged charging
devices, cables and plugs increase the
risk of electric shock.
• Do not use the charging device on eas-
ily flammables items (e.g. paper, tex-
tiles etc.) or in combustible atmos-
pheres. There is a danger of fire due to
the heating of the charging device during
the charging process.
• Supervise children and make sure that
they do not play with the charger. Chil-
dren and persons with mental or phys-
ical restrictions may only use the
charger under supervision or after
having been instructed how to use it.
Careful instruction reduces the risk of
incorrect operation and injuries.

Service

• Have your power tool serviced by a
qualified repair person using only iden-
tical replacement parts. This will ensure
that the safety of the power tool is main-
tained.
Safety Warnings for Drills and Screw-
drivers
• Hold power tool by insulated gripping
surfaces, when performing an opera-
tion where the cutting accessory or
fastener may contact hidden wiring.
Cutting accessory and fasteners contact-
ing a live wire may make exposed metal
parts of the power tool live and could give
the operator an electric shock.

Additional safety notes

• Prior to starting work, use appropriate
tool to determine whether there are
any hidden supply lines are located on
the area you are working in. If in doubt,
ask the relevant supply services. Con-
tact with power lines may cause fire and
electrical shock. Damaging a gas pipe
GB
45