Risks Caused By Vibrations - CMi C-ABS-10,8 Li Set B Originalbetriebsanleitung

Akkuschrauber_Arbeitsleuchte_450219.book Seite 47 Montag, 24. Februar 2014 2:58 14
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to jam
and are easier to control.
• Prevent overheating of the device and
the work piece. Excess heat may dam-
age the tool and the device.
• Never use power tool near flammable
materials. Sparks may set fire to these
materials.
• Keep the handles dry and free of
grease. Slippery handles can lead to
accidents.
• Do not use accessories that have not
been designed and recommended by
the manufacturer for this specific
power tool. Just because you are able to
attach an accessory to your power tool
this does not guarantee that it is safe to
use.
• The permitted revolutions of the tool
must be at least as high as the highest
revolutions specified on the power
tool. Accessories that rotate faster than
they are permitted to may break and fly
and thus cause injuries.
• Remember that moving parts may also
be located behind ventilation and venting
slots.
• Symbols affixed to your unit may not be
removed or covered. Information on the
unit that is no longer legible must be
replaced immediately.
Before putting the unit into operation,
read and observe the instructions for
use.
Risk of damage to the eyes! Never
look directly into the LED.
Only re-charge the battery pack in-
doors.
Do not dispose of a battery pack with
the household waste!
Do not dispose of a battery pack in
water!
Do not dispose of a battery pack the
sewer!
Do not burn the battery pack!
Do not expose the battery pack to
sunlight or increased temperatures!
MAX.XX°C

Risks caused by vibrations

CAUTION!
Risk of injury due to vibrations!
Vibrations may, in particular for per-
sons with circulation problems,
cause damage to blood vessels and/
or nerves.
If you notice any of the following
symptoms, stop working immedi-
ately and consult a doctor. Numb-
ness of body parts, loss of sense of
feeling, itching, pins and needles,
pain, changes in skin colour.
The vibration values specified in the technical
data represent the main uses of the device.
The actual existing vibrations during use may
deviate from these as a result of the following
factors:
• Incorrect use of the product;
• Unsuitable tools inserted;
• Unsuitable material;
• Insufficient maintenance.
You can reduce the risks considerably by fol-
lowing the tips below:
– Maintain the device in accordance with
the instructions in the operating instruc-
tions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and
your hands, in particular, are kept warm.
– Take regular breaks and move your
hands at the same time to promote circu-
lation.
Personal protective clothing
Wear goggles when working with the
device.
Wear ear defenders when working
with the device.
When working with tools that cause
considerable dust, wear a dust pro-
tection mask.
Do not wear protective gloves when
working with the device.
GB
47