urmet domus DS1093-054 Kurzanleitung Seite 25

Select the Schedule tab, shown in Figure.
Click the Edit button. This will open up a new recording schedule, shown in Figure.
Check both the Enable Schedule and All Day checkbox. This will enable the recording schedule and have it
record continuously all day.
Click the OK button. This will take you back to the Schedule tab. To copy the schedule to a different channel,
select the channel or all under Copy To and click the Copy button.
Click the Next button. This will take you to the Network Settings window, shown in Figure.
To configure network settings, click the Enter button.
Enter the IP Address, Subnet Mask and Default Gateway.
Click the OK button to return to the Setup Wizard.
If all the settings are entered as desired, click the Done button to finish and exit the Setup Wizard.
DS1093-XXX
Schedule Settings
Edit Schedule Settings
Network Settings
25