urmet domus DS1093-054 Kurzanleitung Seite 20

• MENU/WIPER Button: Pressing the MENU/WIPER button will return the user to the Main menu (after
successful login). Pressing and holding the button for 5 seconds will turn off audible key beep. The
MENU/WIPER button will also bring up Sensitivity Interface settings. In PTZ Control mode, the MENU/WIPER
button will start wiper (if applicable).
• F1/LIGHT Button: The F1/LIGHT button when used in a list field will select all items on the list. In PTZ Control
mode, it will turn on/off PTZ light.
• F2/AUX Button: The F2/AUX button is used to cycle through tab pages. It will also bring up the Channel & OSD
Position settings.
•
MAIN/SPOT/ZOOM- Button: The MAIN/SPOT/ZOOM- button is used to switch to the control of spot output. In
PTZ Control mode, it can be used to zoom the camera out.
• PREV/FOCUS- Button: The PREV/FOCUS- button is used to switch between single screen and multi-screen
mode. In PTZ Control mode, it is used to adjust the focus in conjunction with the A/FOCUS+ button. It can also
be used to select entire masked areas, such as in Motion Detection and Privacy Mask menus.
• PTZ/IRIS- Button: The PTZ/IRIS- button is used to enter the PTZ Control mode. When in the PTZ Control
mode, it is used to close the iris of the PTZ camera.
15. DIRECTION/ENTER Buttons:
•
DIRECTION Buttons: The DIRECTION buttons are used to navigate between different fields and items in
menus. In Playback mode, the Up and Down button is used to speed up and slow down recorded video. The
Left and Right button will select the next and previous day of recordings. In Preview mode, these buttons can be
used to cycle through channels.
•
ENTER Button: The ENTER button is used to confirm selection in any of the menu modes. It can also be used
to tick checkbox fields. In Playback mode, it can be used to play or pause the video. In Single Play mode,
pressing the ENTER button will advance the video by a single frame.
16. JOG SHUTTLE Control: The JOG SHUTTLE control can be used to move the active selection in a menu. The
inner ring will move the selection up and down; the inner ring will move it left and right. In the Playback mode, the
inner ring is used to jump 30 seconds forward/backward in a video. The inner ring can be used to speed up/slow
down the video. In Preview mode, it can be used to cycle through different channels.
Note:
If GUARD indicator is blue (default), all alarm event and exception settings are valid. Otherwise, alarm event and
exception settings will be invalid, but normal recording will still be available.
Note:
It is important to note that you must click the EDIT button on either the remote or front panel on a text field before you're
able to edit its content. After you're done entering text, you must hit the ENTER button to be able to move on to the next field.
DS1093-XXX 20