Transponder Control - Megasat HD 5 Combo Bedienungsanleitung

3. Main Menu

3.1.8 Transponder control

The transponder control allows you to simultaneously evaluate 4 selected transponders.
At a glance you can see the signal strength and quality of the individual transponders:
1. Use the buttons to change to the desired display.
t u
2. Press OK to enter the transponder list.
3. Use the buttons to select a transponder and confirm with OK.
pq
4. If necessary, repeat the operation with all 4 columns.
5. This function is very good to check all 4 levels at the same time. Make sure that 4
different TPs are selected (HH, VH, HL, VL) and you can control all four transponder
levels at a glance. Furthermore, individual lines can be determined with this function.
Note:
Press the SAT button to select another satellite.
ENGLISH
15