Satelliten-Finder - Megasat HD 5 Combo Bedienungsanleitung

3. Main Menu
3.1.1 Satellite-Finder
82.1 mA
18.6 V
18 V
Satellite
Transponder
Search
Lock / Unlock
PWR
C/N
FEC
BER
Strength/Quality Displays the current strength and the quality of the signal in%.
F1
F2
F3
STORE
08
Shows the current consumption of the LNB.
Shows the feed voltage of the LNB.
Displays the LNB power supply status from the LNB. The values
are 13 V, 18 V or off.
Displays the current satellite. Use the
the satellite or press OK to open the satellite list.
Shows the current transponder. Press OK to open the transpon-
der list. Or enter the transponder data directly.
Press OK to start the search.
Indicates whether the satellite has been found.
Indicates if the satellite was not found (SEARCH).
Displays the current reception power in dBm.
Displays the current C/N value.
Displays the current FEC value.
Displays the current BER value.
Opens the antenna settings. (See page 12)
Opens the transponder control. (See page 15)
Increases the display of signal strength / quality.
Saves the current view in the save menu (screenshot)
ENGLISH
buttons to change
t u