Herunterladen Inhalt Inhalt Diese Seite drucken

Steering; Elevating The Platform; Travel With Work Platform Elevated - Upright MX15 Betriebsanleitung

Vorschau ausblenden Andere Handbücher für MX15:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

S
T E E R I N G
1. Turn the Lift/Drive Switch to
2. While engaging the Interlock Switch, push the Steering Switch to the RIGHT or LEFT to turn the wheels
in the desired direction. Observe the tires while maneuvering the machine to ensure proper direction.
NOTE: Steering is not self-centering. Wheels must be returned to the straight ahead position by operating the Steering
Switch.
E
L E V A T I N G T H E
1. Locate a firm, level surface.
2. Check clearances above, below, and to the sides of machine.
3. Turn the Lift/Drive Switch to
REVERSE
4. While engaging the Interlock Switch, push the Control Handle to
5. If the machine is not level the level sensor alarm will sound and the machine will not lift or drive. If the
FORWARD
level sensor alarm sounds the platform must be lowered and the machine moved to a firm, level
surface before attempting to elevate the platform.
NOTE: The Depression Mechanism supports will deploy automatically as the platform elevates and will retract after
the platform has been lowered completely and has been driven.
T
R A V E L W I T H
NOTE: The machine will travel at reduced speed when the platform is elevated.
1. Check that the route is clear of surface hazards such as holes, drop-offs, bumps, curbs, or debris.
2. Check that the route is level, and is capable of supporting the wheel loads.
3. Check clearances above, below, and to the sides of platform.
4. Turn the Lift/Drive Switch to
REVERSE
5. Engage the Interlock Switch and move the Control Handle to
tion. The speed of the machine will vary depending on how far from center the Control Handle is moved.
FORWARD
6. If the machine is not level the level sensor alarm will sound and the machine will not lift or drive. If the
level sensor alarm sounds the platform must be lowered and the machine moved to a firm, level
surface before attempting to elevate the platform.
113100-020 - MX15 / MX19 - Operation Manual
.
P
L A T F O R M
.
W
P
O R K
L A T F O R M
.
.
E
L E V A T E D
or
to travel in the desired direc-
Operation
Page 9

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mx19

Inhaltsverzeichnis