Upright MX15 Betriebsanleitung Seite 9

16. Turn the Chassis Key Switch to
17. Check that the route is clear of surface hazards such as holes, drop-offs, bumps, curbs, or debris, and is
level and capable of supporting the wheel loads.
18. Mount the platform and properly close and secure the entrance.
19. Turn the Lift/Drive Switch to
20. Check for speed and directional control.
REVERSE
• While engaging the Interlock Switch, slowly position the Control Handle to
you push or pull the Control Handle from center the faster the machine will travel.
FORWARD
21. Push the Steering Switch RIGHT, then LEFT, to check for steering control.
22. Check clearances above, below, and to the sides of machine.
23. Turn the Lift/Drive Switch to
• While engaging the Interlock Switch, move the Control Handle to
• While engaging the Interlock Switch, move the Control Handle to
platform should descend and the audible lowering alarm should sound.
24. Push the Platform Emergency Stop Switch to check for proper operation. All machine functions should
be disabled. Pull out the Platform Emergency Stop Switch to resume.
113100-020 - MX15 / MX19 - Operation Manual
.
.
to check platform lift controls.
System Function Inspection
then . The farther
to raise the platform.
to lower the platform. The
Page 7