Workers best WB 18 217 CT Combitool Bedienungsanleitung Seite 22

e. Take good care of the device. Ensure that moving parts of the device function
properly and do not seize, if parts are broken or are damaged, then device
function is impaired. Have the damaged parts repaired before using the tool.
Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Carefully maintained cutting tools with sharp
cutting edges seize less and are easier to control.
g. Use power tools, accessories, insertion tools etc. according to these instructions,
and in the manner prescribed for this particular device type. Give due
consideration to work conditions and the task that will be executed. Using power
tools for applications other than their intended use can lead to dangerous situations.
5. Service
a. Only have your device repaired by qualified, specialised personnel, and only repair
with original replacement parts. This ensures that the safety of the device remains
unimpaired.
b. For electric appliances with the attachment X, where a specially made connecting
line is required for the exchange of the connecting line: When the connecting line of
the electric tool is damaged, it must be replaced though a specially made connecting
line which is available though the client service organization.
Special notices
Safety precautions for all applications
Common safety directions for grinding, sanding, with wire brushes, polishes and cutting
off by grinding.
This power tool is to be used as a grinder, sander, wire brush, burnisher and
a)
abrasive cut­ off machine. Observe all the safety directions, instructions,
representations and specifications that you receive with the tool.
Failure to observe the following directions could cause electric shock, a fire and/or
serious injuries.
Do not use accessories, which are not specially intended and recommended
b)
by the manufacturer for this power tool.
The fact that you can attach the accessory to this power tool does not guarantee
the safety of its use.
WB 217 CT neu.indd 21
21
17.12.12 09:41