Workers best WB 18 217 CT Combitool Bedienungsanleitung Seite 19

Technical Specifications
Nominal rating
Idle speed
Tool diameter
Sound pressure level
Sound power level
Oscillation level
Nominal voltage/Rate
Protection class
Wear hearing protection, protective goggles and gloves
Do not use in rain; protect from wetness
Keep other persons at a distance
Read the Operating instructions
AHS GmbH, Uhlandstraße 50, A-4600 Wels
Intended use
The Combitool is used for drilling, milling, engraving, polishing, grinding or separating
different materials for model making and hobbies.
Only use this machine according to its intended use! Any use extending beyond this does
not constitute intended use. The user, not the manufacturer, is liable for resulting damages
or injuries of any kind.
Our equipment is not intended for commercial or industrial use. If this device is used in the
context of commercial or industrial use, the warranty is void.
When using tools some safety precautions must be observed to prevent injuries
and damage. Therefore read through the operating manual/ safety instructions
carefully. Store them in a safe place so that the information is available to you at
all times. If you should hand the appliance on to other persons please hand
these operating instructions/safety instructions out with them. We do not assu-
me any liability for accident or damage which do not arise due to the failure to
observe these instructions and the safety instructions.
General safety instructions
Attention! All instructions must be read. Errors in heeding the instructions given below
could cause electric shock, burning and/or serious injuries.
The subsequently used term „power tool" refers to mains powered electrical tools (with
power cord) and to battery-powered electrical tools (without power cord).
WB 217 CT neu.indd 18
8.000-30.000 rpm
max: 24 mm
(L ) 76.4 dB (A)
PA
(L ) 89.4 dB (A)
WA
230 VOLT ~50 Hz
18
130 WATT
4.5 m/s 2
II
17.12.12 09:41