Trim; Speed And 360 Degree Flips And Rolls; Headless Mode - XciteRC Rocket 250 3D Bedienungsanleitung

Trim · Speed and rolls · Headless Mode

Trim

Yaw trim

Speed and 360 degree flips and rolls

Speed: press the AUX1 button on the left side of the transmitter (1) during the flight and the Quadrocopter
becomes faster. The display switches fron EASY to PRO (2). Press the AUX1 button again to return to slower
speed.
AUX2 Button AUX1 Button
360 degree flips and rolls
Once you are familiar with the aforementioned maneuvers, you can venture to flips and rolls. Fly at least 1.5
m high, and then activate the PRO mode (see above). Then press the AUX2 button (3). A sound and 3D in
the screen (4) indicates that the mode is active. Now move the right control lever to the desired direction (5)
and the model rolls once around its own axis.
AUX2

Headless mode

The Headless mode is ideal for beginners to fly the model safely. In headless mode, the Quadrocopter always
flys from the pilot's view. No matter how the model is in the air, the front is always away from the pilot, left and
right does not swap when the model is flying towards the pilot.
The Headless mode is activated by pressing the control lever, a beep indicates the function. As long as this
beep appears, the Headless mode is active. Press the control lever again to deactivate the headless mode.
Press
XciteRC Rocket 250 3D
Forward/
Backward
trim
Left / Right
trim
AUX1
3 LCD Display
L . H
L . H
%
E A S Y
1
4
3 D
%
P R O
2
LCD Display
L . H
%
P R O
5
21