Specifi Cations - Hameg HM400 Handbuch

40 MHz Analog Oscilloscope HM400
All data valid at 23 °C after 30 minute warm-up
Vertical Deflection
Operating Modes: Channel 1 or 2 only
Channels 1 and 2 (alternate or chopped)
Sum or Difference of CH 1 and CH 2
Invert: CH 2
XY Mode: CH 1 (X) and CH 2 (Y)
Bandwidth (-3 dB):
DC, 5mV/div....20V/div.: 0...40MHz
AC, 5mV/div....20V/div.: 2Hz...40MHz
DC, 1...2mV/div.: 0...10MHz
AC, 1...2mV/div.: 2Hz...10MHz
Rise Time (calculated): ‹ 35 ns (1 mV/div....2 mV/div.)
‹ 8,75 ns (5 mV/div....20 V/div.)
Deflection Coefficient: 1-2-5 Sequence
± 5% (1 mV/div....2 mV/div.)
± 3% (5 mV/div....20 V/div.)
Variable (uncalibrated): › 2.5:1 to › 50 V/div.
Input Impedance: 1 MΩ II 15 pF
Input Coupling: DC, AC, GND (ground)
Max. Input Voltage: 400 V (DC + peak AC)
Triggering
Automatic: Linking of peakdetection and triggerlevel
Min. signal height 0.5div
Frequency range 5Hz...50MHz
Level control range From peak- to peak+
Normal (without peak):
Min. signal height 0.5div
Frequency range 0...50MHz
Level control range –10....+10div.
Slope: Rising or falling
Sources: Channel 1 or 2, Line and External
Coupling: AC (5 Hz...80 MHz), DC (0...80 MHz),
LF (0...1.5 kHz)
Trigger Indicator: LED
External Trigger:
Input Impedance: 1MΩ II 15pF
External Trigger Signal: 0,3 V
DC (0...50 MHz), AC (20 Hz...50 MHz)
Max. input voltage: 100 V (DC + Peak AC)
Active TV sync. separator: Field and Line, +/-
Horizontal Deflection
Time Base: 100 ns / div.....0.2 s / div (1-2-5 Sequence)
Accuracy: ± 3 %
Variable (uncalibrated): › 2.5 :1 to › 1.25 s/div.
X Magnification x 10: up to 10 ns/div.
Accuracy: ± 5 %
Hold-Off Time: variable to approx. 10 : 1
XY
Bandwidth X amplifier: 0...2.5 MHz (-3 dB)
XY Phase shift ‹ 3°: ‹ 120 kHz
Operation / Readout / Control
Manual: via controls and buttons
Autoset: automatic signal related parameter settings
Save and Recall: 6 instrument parameter settings
Component Tester
Test Voltage: approx. 7 V
Test Current: max. 7 mA
Test Frequency: approx. 50 Hz
Test Connection: 2 banana jacks 4 mm Ø
One test circuit lead is grounded via protec-
tive earth (PE)
w w w . h a m e g . c o m
HM400E/091109/ce · Subject to changes · © HAMEG Instruments GmbH
HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel +49 (0) 6182 800 0 · Fax +49 (0) 6182 800 100 · www.hameg.com · info@hameg.com
≤ 5 V,
pp
(open circuit)
rms
(short-circuit)
rms
Miscellaneous
CRT:
Acceleration Voltage:
Trace Rotation:
Z-Input (Intens. modulation): max. + 5 V (TTL), 10 kHz
Probe ADJ Output:
Power Supply (Mains):
Power Consumption:
Safety class:
Operating temperature:
Storage temperature:
Rel. humidity:
Dimensions (W x H x D):
Weight:
Accessories supplied: Line Cord, Operators Manual, 2 Probes 1:1/10:1 (HZ154)
with LF/HF adjustment
Optionales Zubehör:
HZ20 Adapter, BNC to 4mm banana
HZ33 Test cable 50Ω, BNC/BNC, 0,5m
HZ34 Test cable 50Ω, BNC/BNC, 1m
HZ45 19''-Rackmount Kit 4RU
HZ51 Probe 10:1 (150MHz)
HZ52 Probe 10:1 RF (250MHz)
HZ53 Probe 100:1 (100MHz)
HZ56-2 AC/DC Current probe
HZ100 Differential probe 20:1 / 200:1
HZ109 Differential probe 1:1 / 10:1
HZ115 Differential probe 100:1 / 1000:1
HZ200 Probe 10:1 with auto attenuation ID (250MHz)
HZ350 Probe 10:1 with automatically identification (350MHz)
HZ355 Slimline probe 10:1 with automatically identification (500MHz)
HZO20 High voltage probe 1000:1 (400MHz,1000Vrms)
HZO30 Active probe 1GHz (0,9pF, 1MΩ, including many accessories)
HZO50 AC/DC Current probe 20A, DC...100kHz
HZO51 AC/DC Current probe 1000A, DC...20kHz
®
· DQS-certified in accordance with DIN EN ISO 9001:2000, Reg.-No.: DE-071040 QM
S p e c i f i c a t i o n s
D14-363GY, 8 x 10 div. with internal graticule
approx. 2 kV
adjustable on front panel
1 kHz / 1 MHz Square Wave Signal ca. 0.2 V
(tr ‹ 5 ns) for probe adjustment
105...253 V, 50/60 Hz ± 10 %, CAT II
approx. 30 Watt at 230 V/50 Hz
+5 °C...+40 ° C
Safety class I (EN61010-1)
+5...+40°C
-20...+70°C
5...80% (non condensing)
285 x 125 x 380 mm
approx. 4.8 kg
Subject to change without notice
pp
27