Bosch Performance Line Nyon BUI275: 1 270 020 915 Originalbetriebsanleitung Seite 22

OBJ_BUCH-2616-003.book Page 6 Wednesday, June 14, 2017 2:24 PM
English–6
If you have entered the destination (town, street, house num-
ber), three different routes ("Scenic", "Fast" and "MTB"
(Mountain bike)) will be provided for you to choose from.
Alternatively, you can opt to be guided home, select one of
the last destinations used, or choose from saved locations
and routes. (Detailed instructions can be found in the online
manual under "www.Bosch-eBike.com/nyon-manual".)
The selected route will be displayed as shown in the figure be-
low.
n1
n2
n3
n4
n1 Clock
n2 Compass needle
n3 Map
n4 Speed
n5 Shift recommendation
n6 Turn instructions and distance to the next turn
n7 Distance to destination
n8 Estimated time of arrival at destination
During the navigation, the guidance (e.g. turn left in 50 me-
ters) will also be displayed via a cross fade in other operating
modes.
By right-clicking on the joystick, you can also display the eleva-
tion profile of your route. It is also possible to explore the sur-
rounding area by adjusting the map using the zoom function.
If you interrupt a journey for which you are using navigation
and then call up "Map & Navigation", you will be asked
whether or not you wish to continue navigation. If you contin-
ue navigation, the navigation system will guide you to your last
destination.
If you have imported GPX routes via the online portal, these
will be transferred to your Nyon via Bluetooth® or via a WLAN
connection. You can start these routes when you wish. If you
are near a route, you can have the navigation system guide
you to the starting point or you can start navigating along the
route immediately.
If you are using intermediate destinations, a message will in-
form you when you have reached an intermediate destination.
Nyon is not suitable for a navigation without a bicycle (for hik-
ers or motorists).
At temperatures below 0 °C, the altitude measurement is like-
ly to deviate significantly.
1 270 020 XBN | (14.6.17)
Operating mode "Fitness"
Via this mode you can view various fitness-related informa-
tion.
Based on the activity levels provided in your registration, the
effect of your previous activities will be displayed on your
stamina level (training effect).
To check your heart rate, you can use a chest strap, which you
can connect to Nyon via Bluetooth®.
n5
Compatible models can be found in the online manual under
"www.Bosch-eBike.com/nyon-manual".
n6
A chest strap is not included in the delivery.
f1
n7
n8
f2
f3
f4
f1 Clock
f2 Current performance/heart rate*
f3 Display of the current training effect
f4 Training effect
f5 Kilocalories burned
f6 Current cadence
f7 Current speed
f8 Duration
* When using a chest strap to measure the heart rate (not included
in the delivery), your current heart rate will be displayed instead of
the performance.
Via the sub menus, you can reset the average values or switch
to individualised displays. Detailed instructions can be found
in the online manual under
"www.Bosch-eBike.com/nyon-manual".
Operating mode "Settings"
This operating mode allows you to set the basic configura-
tions of your on-board computer.
Note: Some basic configurations can only be changed when
Nyon is inserted into the holder 4.
To reach the "Settings" menu, press the joystick 1 down in
the main menu until "Settings" is displayed.
Tip: If you press the joystick down long enough, you will also
reach the "Settings" menu.
f5
f6
f7
f8
Bosch eBike Systems