Functions Of The Electronic Watch - SPORTSTECH X150 Benutzerhandbuch

6.3. FUNCTIONS OF THE ELECTRONIC WATCH

1. Function button:
Mode / Reset
2. Functions and operations:
1. SCAN: Press MODE button until "
rotate through the following functions: time, speed, distance, odo, calorie and pulse,
each display will be hold 6 seconds.
2. TIME: Count the total time from exercise start to end.
3. SPEED: Display current speed.
4. DISTANCE: Count the distance from exercise start to end.
5. ODOMETER: Monitor will display the total accumulated distance.
6. CALORIE: Count the total calories from exercise start to end.
7. PULSE RATE: Press MODE button until "
Before measuring your pulse rate, please place your palms of your hands on both
of your contact pads and the monitor will show your current heart beat rate in beats
per minute(BPM) on the LCD after 6~7 seconds.
Remark: During the process of pulse measurement, because of the contact jamming,
the measurement value may be higher than the virtual pulse rate during the first 2~3
seconds, then will return to normal level. The measurement value can not be regar-
ded as the basis of medical treatment.
i
1. If the display is faint or shows no figures ,please replace the batteries.
2. The display will automatically shut off if there is no signal received after 4 minutes.
3. The display will be auto powered on when starting to exercise.
4. The display will automatically start calculating when you start to exercise and will
stop calculating when you stop exercising for 4 seconds.
Specifications:
FUNCTION
OPERATING TEMPERATURE
STORAGE TEMPERATURE
- Press to select functions
- Press for 6 seconds to reset time, distance and calories.
AUTO SCAN
TIME
CURRENT SPEED
DISTANCE
CALORIES
ODO
PULS RATE
BATTERY TYPE
36
" appears at SCAN position, monitor will
" appears at PULSE position.
Every 6 seconds
00:00'~99:59'
0.1~99.9 KM/H
0.01~99.99 KM
0.1~999.9 kCAL
0.1~999.9 KM
40~206 BPM
2pcs of SIZE –AAA or UM –4
0°C ~ +40°C
-10°C ~ +60°C