SPORTSTECH X150 Benutzerhandbuch Seite 29

Step 4 ATTACH HANDLEBAR AND METER
•
Remove the pre-assembled 4 bolt (87) and 2 flat washer(75) ,2 curved washer
(90), pvc washer (83) and spring washer (88) . from low of the handlebar (92).
•
Put handlebar (92) with 2 hand pulse (91), grip to the front post tube (55) and fas-
ten bolt (87) ,flat washer (75) and curve washer (90), spring washer (90) and pvc
washer (83).
•
Fasten each one piece tightly.
•
Connect the middle meter WIRE (39) and the jack of meter (86), and connect the
hand pulse wire with meter (86).
NOTE: TAKE CARE to ensure that the wire does not get trapped when you attach
the meter. Connect handle grip to top of rope (79).
29