SPORTSTECH X150 Benutzerhandbuch Seite 28

Step 2 ATTACH THE PEDAL
•
Assemble each pedal (12R&12L) to the crank . Pedal "R" assemble with crank right
side , Pedal "L" assemble with crank left side : See the mark „R" & „L"(right and left)
on the pedals (126R&12L) and crank.
NOTE: The right pedal „R" should be threaded on clockwise. The left pedal „L"
should be threaded on counter-clockwise.
•
Attach the pedal straps to the pedals (12R&12L).
NOTE: Adjust the pedal straps to meet your foot/shoes size by 4 adjustable holes.
Step 3 ATTACH THE SEAT AND SEAT POST
•
Remove the pre-assembled nylon nuts (51) and flat washer (50) from back of the
seat (67). Fix the seat (67) with the top seat tube (67) and fasten with nylon nut (51)
and flat washer (50).
•
Attach seat tube (67) into the main frame (55) and secure in right position with the
seat post quick release knob (45). Adjust the height of seat by choosing the hole of
seat tube.
•
Attach back seat tube (70) into the seat tube (67) fasten with 2 carriage bolt (69), 2
flat washer (50) and 2 head nut (4).
•
Fix the backrest fasten with 4 flat washer (75) and 4 bolt (74).
28