VOLTCRAFT VC-740E AC Bedienungsanleitung Seite 43

REL Relative value button (= reference value measurement)
SELECT Switch to sub-functions
RANGE Manually select measuring range
MAX MIN Maximum/minimum memory
HOLD Freezes the current measurement
OL Overload = the measuring range was exceeded
OFF Move to this position to turn the multimeter off
Low battery warning (replace the battery)
Diode test symbol
Acoustic continuity tester
Capacity measuring range
°C °F Temperature unit (degrees Celsius/Fahrenheit)
Alternating current
Direct current
COM Connection for reference potential
V Voltage mode (Volt = unit of electrical voltage)
A Current mode (Ampere = unit of electric current)
µA Current mode (Micro-Ampere)
Hz Frequency mode (Hertz = unit of frequency)
Ω Resistance mode (Ohm = unit of electrical resistance)
Motor 3-phase rotation direction indicator
LoZ Low-impedance (300 kΩ)
Disables automatic backlight
Indicates the direction of the current when taking current clamp measurements (not relevant)
Indicates the direction of the current when taking current clamp measurements (not relevant)
43