Inserting Batteries Into The Remote Control; Inserting Batteries Into The Light Barrier (Virtual Wall); Setting The Time; Vacuum Cleaner Operation - Medion MD 16192 Bedienungsanleitung

6.3. Inserting batteries into the remote control

 Slide down the battery compartment cover on the back of the remote control.
 Insert two 1.5 V batteries of type AAA and observe the polarity shown in the
battery compartment.
 Place the battery cover back on the battery compartment and slide it shut.
6.4. Inserting batteries into the light barrier (virtual
wall)
 Remove the battery compartment cover by pressing the opening tab backwards
and simultaneously lifting the battery compartment cover.
 Insert two 1.5 V batteries of type AA and observe the polarity shown in the
battery compartment.
 Close the battery compartment cover.

6.5. Setting the time

In order to be able to use the start time function, it is firstly necessary to set the time
on the remote control. Proceed as follows:
 Press the CLOCK button to set the current time.
The hour display flashes.
 Use the arrow buttons
the minutes display.
The minute display flashes.
 Use the arrow buttons
 Confirm your selection by pressing the CLOCK button.
The time is now set.

7. Vacuum cleaner operation

To achieve the best cleaning performance, ensure that all loose objects (curtains,
clothing, paper, loose cables and extension cables) are removed from the floor.
ATTENTION!
Risk of property damage.
Loose cabling can get caught around your robot
vacuum cleaner during vacuuming and be pulled by
the appliance. This can lead to appliances being pulled
from a table and damaged.
 Lay cables out of the reach of the appliance.
or to set the hour. Then press the
or to set the minutes.
DE
FR
NL
ES
IT
EN
button to set
147 of 158