Selecting The Modes; Using The Light Barrier (Virtual Wall); Cleaning And Care - Medion MD 16192 Bedienungsanleitung

7.2. Selecting the modes

The robot vacuum cleaner is automatically guided through the room using the
sensors, the bumpers on the appliance and the special light barrier. You can select
how the robot vacuum cleaner should operate:
Cleaning mode
Automatic
Spot cleaning
Cleaning along a wall
Return to the charging
station

7.3. Using the light barrier (virtual wall)

In order to limit the operating range of the robot vacuum cleaner e.g. to exclude
certain areas from the cleaning process or to protect the appliance from falling
down stairs, you can set up the light barrier.
 Position the light barrier in front of obstacles or the forbidden cleaning zone.
 Set the On/Off switch on the light barrier to the ON position.
During operation, the robot vacuum cleaner will immediately turn around after passing
the light barrier.

8. Cleaning and care

DANGER!
Live components. Risk of electric shock.
 Never immerse the robot vacuum cleaner, charging
station or mains adapter in water or other liquids!
Only clean the appliance and all accessories with a
dry or slightly damp cloth.
 Set the On/Off switch to the
disconnect the mains plug from the mains socket
before cleaning or servicing the appliance and
before fitting or removing accessories.
Button to press
CLEAN
:
Type of cleaning
Standard cleaning dependent on
obstacles
For the targeted cleaning of an
area around the starting location of
the robot vacuum cleaner
For cleaning along walls/obstacles.
If no obstacles are available for ori-
entation, the robot vacuum cleaner
will stop the cleaning process.
The robot vacuum cleaner returns
to the charging station and charg-
es the battery block.
OFF position and always
DE
FR
NL
ES
IT
EN
149 of 158