D-Pdu Api Function Test - I+ME ACTIA eCOM Box Benutzerhandbuch

6. Software
function test
6.4 PDU API
The installation package contains the test application "XS D PDU API Tester".
After successful configuration of the network and selection of an eCOM, this programme
indicates function of the D-PDU API. For a standard installation, you will find the
programme via Start -> Programs -> XS D-PDU API -> XS D PDU API Tester or in the
installation folder. The application permits execution of a connection test and thereby
verification of the complete installation.
For this, start the application and operate the button Start in the subsequent dialogue. If the
installation was successful and the eCOM Box selected by TKSelection can be reached by
Unicast via the network, all tests completed successfully are marked by an OK checkmark
in the respective checkbox.
The following figure shows a successfully completed connection test.
Figure 6: XS D-PDU API Tester
Page 28