I+ME ACTIA eCOM Box Benutzerhandbuch Seite 25

The following figure shows the settings required for the eCOM Box:
The checkbox „Install full versioned D-PDU API" must be checked if you need
several versions of the
The standard installation path is
The installation directory contains:
PDU-API-DLL (PDUAPI_I+ME_ACTIA_XS.dll)
The root-description-file (RDF_I+ME_ACTIA_XS.xml), at D-PDU API initial installation
The module-description-file (MDF_I+ME_ACTIA_XS.xml)
The cable-description-file (CDF_I+ME_ACTIA_XS.xml)
D-PDU API tester application for initial commissioning
A configuration file is located in the application area under:
{Program Data}\I+ME Actia GmbH\XS D PDU API x.x.xx.x
For quick access, the following entries are set up in the start menu under „XS D PDU API":
XS D PDU API Tester (test application)
XS D PDU API Uninstaller
If the USB-to-LAN converter is used, a driver must be installed for this. The driver software
is available online for download via the link
http://www.ime-actia.de/web_can/software/download_sw.htm
Choose the correct operating system.
Figure 2: D-PDU API installation options
D-PDU API software on one computer.
: {Program Files}\I+ME Actia GmbH\XS D PDU API.
:
Page 23
6. Software