Remaining Risk Factors - Holzmann NTS 250 Betriebsanleitung






13.3 Remaining risk factors

It is important to ensure that each machine has remaining risks.
In the execution of all work (even the simplest) greatest attention is
required. A safe working depends on you!
Even if the machine is used as required it is still impossible to eliminate certain residual risk
factors totally. The following hazards may arise in connection with the machine´s construction
and design:
 Risk of injury to the hands / fingers by the rotating grinding- / polishing wheels during
operation.
 Risk of injury due to sharp blades of the sharpened tools or knifes.
 Risk of injury: hair and loose clothing, etc. can be captured and wound up! Safety
regulations must be observed with regard to clothing.
 Risk of injury due to contacting with live electrical components.
 Risk of injury to the eye by flying debris, even with safety goggles.
These risk factors can be minimized through obeying all security and operation instructions,
proper machine maintenance, proficient and appropriate operation by persons with technical
knowledge and experience.
HOLZMANN MASCHINEN GmbH
Never leave the machine running unattended! Before leaving the
working area switch the machine off and wait until the machine stops.
Always disconnect the machine prior to any actions performed at the
machine.
Avoid unintentional starting
Do not use the machine with damaged switch
www.holzmann-maschinen.at
W A R N I N G
SAFETY
21
NTS 250 / NTS 250PRO