Electrical Wiring Connection - Daikin FWG05AATNMV1 Installationsanleitung

IMPORTANT: * These values are for information only. They should be checked and selected to comply with local and/or
** The appropriate voltage range should be checked with label data on the unit.
Model: FWG05/08/11AAT
CVLV
3WV
CHILLER
Model: FWG05/08/11AAF
FCU 1
HVLV N1 CVLV
3WV 3WV
CHILLER
Model
Voltage Range**
Recommended time delay fuse*
Power Supply Cable*
Interconnection cable size*
Number of conductors
1 IM-CKEW(DC)-1013(1)DAIKIN-EN.i9 9 1 IM-CKEW(DC)-1013(1)DAIKIN-EN.i9 9

ELECTRICAL WIRING CONNECTION

national codes and regulations. They are also subject to the type of installation and size of conductors.
There must be an all pole disconnection in the supply mains with a contact separation of at least 3mm.
FCU 1
N1 L N CVLV
3WV
L
N
X1
!
There must be an all pole
disconnection in the supply
mains with a contact separation
of at least 3mm.
All power line must be from the
same phase.
N2 L N HVLV N1
3WV
L
N
X1
!
There must be an all pole
disconnection in the supply
mains with a contact separation
of at least 3mm.
All power line must be from the
same phase.
(A)
2
(mm )
(mm 2 )
FCU 2
N1 L N CVLV
3WV
L
N
X2
FCU 2
CVLV N2 L N HVLV
3WV 3WV
L
N
X2
FWG05AAT(F) FWG08AAT(F)
220V-240V/~/50Hz + !
2
1.5
3
1-9
FCU 3
N1 L N
L
N
X3
3WV 3 Way Valve
X1, X2,X3 Relay
Field Supply Wire
FCU 3
N1 CVLV N2 L N
3WV
L
N
X3
3WV 3 Way Valve
X1, X2,X3 Relay
Field Supply Wire
FWG11AAT(F)
2 2
1.5 1.5
3 3
7/1/14 2:39:06 PM 7/1/14 2:39:06 PM