Change Phone Book Entry - Renkforce 1312695 Bedienungsanleitung

• When you have entered the desired name, push the left function button (1) briefly to confirm.
• Enter the desired phone number with the numeric keys (5).
The right function button (9) deletes the last number entered.
If you want to enter a pause when dialling the number (this may be required for a switchboard to
wait for a trunk line), push the button „
If the number is later dialled from the phone book, the mobile unit will pause briefly here.
• When you have entered the desired number, push the left function button (1) briefly to confirm.
• Now select a ring tone with the buttons „
entry. The selected ring tone is played for review. There are 10 different ring tones available in total.
• Save the phone book entry by briefly pushing the left function button (1).
If described, you can now generate another phone book entry or leave the setup menu (either repeatedly
push the right function button (9) or briefly push the button „
u Change Phone Book Entry
• Starting in the standby mode, briefly push left function button (1).
• Use the buttons „
briefly for confirmation.
• Use the buttons „
function button (1) briefly for confirmation.
• Use the buttons „
left function button (1) briefly for confirmation. At the end of the displayed list, the mobile unit emits a
sound signal.
• The display now shows the name that has been saved for the selected phone book entry.
• Use the right function button (9) to delete the respective last character.
As described when adding a new phone book entry, a character can be entered with the numeric but-
tons (5) see table on the preceding page).
To select a specific character, push the same button briefly several times.
If you want to accept the displayed character, pause briefly. The flashing input cursor will now move to
the next digit.
• When you have corrected the name, push the left function button (1) briefly to confirm.
• The display now shows the number of the phone book entry.
98
" (2) or „ " (12) to select the phone book and push the left function button (1)
" (2) or „ " (12) to select the function for changing an entry and push the left
" (2) or „ " (12) to select the phone book entry you want to change and push the
" (11). Instead of a number, the letter „P" appears.
" (2) or „ " (12) that you want to link to the phone book
" (10)).