Speaker/Handset Volume Settings; Dial Tone (Internal/External) Settings - Renkforce 1312695 Bedienungsanleitung

u Speaker/Handset Volume Settings
• Starting in the standby mode, briefly push left function button (1).
• Use the buttons „
(„HS Settings") and push the left function button (1) briefly for confirmation.
• Use the buttons „
function button (1) briefly for confirmation.
• Use the buttons „
on the rear of the mobile unit for the hands free function) or the setting of the handset volume. Push the
left function button (1) briefly for confirmation.
• Set the desired volume (5 levels) with the buttons „
• Save the setting with the left function button (1); a brief confirmation sound is emitted.
u Dial Tone (Internal/External) Settings
• Starting in the standby mode, briefly push left function button (1).
• Use the buttons „
(„HS Settings") and push the left function button (1) briefly for confirmation.
• Use the buttons „
function button (1) briefly for confirmation.
• Use the buttons „
sound. Push the left function button (1) briefly for confirmation.
The internal call sound is used if the call comes in from another mobile unit. The external call
sound is used when a call comes in through the phone grid.
• Choose between the melody and volume settings with the buttons „
function button (1) briefly for confirmation.
• Then you can use the buttons „
the volume (5 levels & off).
If you set the volume to „off", a text is displayed for a call.
• Save the setting with the left function button (1); a brief confirmation sound is emitted.
" (2) or „ " (12) to select the submenu for the setting of the mobile unit
" (2) or „ " (12) to select the submenu for the audio settings and push the left
" (2) or „ " (12) to choose between the settings of the speaker volume (speaker
" (2) or „ " (12) to select the submenu for the setting of the mobile unit
" (2) or „ " (12) to select the submenu for the call sound settings and push the left
" (2) or „ " (12) to choose between the setting of the internal or external call
" (2) or „
" (2) or „ " (12).
" (12) to set the melody (10 different ones are available) or
" (2) or „ " (12). Push the left
105