F) Mobile Unit Settings; Alarm Functions - Renkforce 1312695 Bedienungsanleitung

f) Mobile Unit Settings

u Alarm Functions
• Starting in the standby mode, briefly push left function button (1).
• Use the buttons „
(„HS Settings") and push the left function button (1) briefly for confirmation.
• Use the buttons „
left function button (1) briefly for confirmation.
• Use the buttons „
button (1) briefly for confirmation.
• If you have switched the alarm function on, enter the desired wake-up time with the numeric buttons
(24h-format).
Use the buttons „
tion.
• Push the left function button (1) briefly for confirmation.
• Use the buttons „
• To confirm, briefly push the left function button (1), to leave the submenu for the wake-up function/
alarm.
The alarm tone is issued at the set alarm time. Terminate it by pushing any button on the mobile
unit. The wake-up function will start again on the next day.
If the snooze function is activated, you can interrupt the alarm sound for approx. 11 minutes by
pushing any button (except for the button „
Terminate the snooze function and thus also the alarm sound with the button „
104
" (2) or „ " (12) to select the submenu for the setting of the mobile unit
" (2) or „ " (12) to select the submenu for the alarm function/alarm and push the
" (2) or „ " (12) to switch the alarm function on or off and push the left function
" (2) or „ " (12) to switch the input digit (flashes), e.g. to make a correc-
" (2) or „ " (12) to switch the snooze function on or off.
" (10)). The alarm sound is then issued again.
" (10).