Switching The Appliance On; Setting The Temperature; Alarm Function; Usable Capacity - Bosch KSF Serie Gebrauchsanleitung

en
Switching the
appliance on
Fig. 2
Switch on the appliance with the On/Off
button 1.
The temperature display 4 indicates the
set temperature.
The appliance begins to cool. Light is
switched on when the door is open.
We recommend a factory setting of +4
°C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.
Operating tips
After the appliance has been switched
■
on, it may take several hours until the
set temperatures have been reached.
Do not put any food in the appliance
beforehand.
If the air humidity is high,
■
condensation may form in the
refrigerator compartment, especially
on the glass shelves. If this is the
case, pack or wrap the food and
select a lower temperature in the
refrigerator compartment.
Setting
the temperature
Fig. 2
Refrigerator compartment
The temperature can be set from +3 °C
to +8 °C.
24
Keep pressing temperature setting
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 4.
Cool-fresh compartment
The temperature in the "cool-fresh"
compartment has been set to almost
0 °C at the factory and should not be
changed if at all possible.
If frost forms on the refrigerated food,
the temperature can be increased. (See
chapter "Eliminating minor faults
yourself".)

Alarm function

Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than two minutes. Close
the door to switch off the warning signal.
Switching off the alarm
Fig. 2
Press the alarm button 5 to switch off
the warning signal.

Usable capacity

Information on the usable capacity can
be found inside your appliance on
the rating plate. Fig. -