Herunterladen Inhalt Inhalt Diese Seite drucken

PeakTech 2510 Bedienungsanleitung Seite 40

Vorschau ausblenden Andere Handbücher für 2510:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Batteries, which contain harmful substances, are marked with the
symbol of a crossed-out waste bin, similar to the illustration shown
left. Under the waste bin symbol is the chemical symbol for the
harmful substance, e.g. „Cd" for cadmium, „Pb" stands for lead and
„Hg" for mercury.
You can obtain further information about the Battery Regulations from the
Bundesministerium für Umwelt, Naturschutz und Reaktorsicherheit (Federal Ministry
of Environment, Nature Conservation and Reactor Safety).
8.2. Cleaning
Only use dry cloths to clean the plastic case !
9. RS232 PC Serial Interface
The instrument features an RS-232 output via 3,5 mm terminal (3-22, Fig. 1). The
connector output is a 16 digit data stream, which can be utilized to the user's specific
application.
An RS-232 lead with the following connection will be required to link the instrument
with the PC serial input.
Meter
3,5 mm jack plug
Center Pin...................................
Ground/Shield..............................
PC
9 W "D"-Connector
Pin 4
Pin 2
2.2 K
Resistor
Pin 5
-39-

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis