PeakTech 2510 Bedienungsanleitung Seite 37

2. Select the CT type, 100/5 or 1000/5 by pushing the "Current Mode Button" (3-12,
Fig. 1). The LCD will show the marker "CT 100/5 A", "CT 1000/5 A" when the CT
type is selected.
[Geben Sie ein Zitat
7.8. AC Watt, VA, Whr measurement, current input cooperate with
Clamp-On probe
Other measurement procedures are same as the 7.1, 7-2, except:
1. Wire connection as follows, refer (Fig. 4)
Voltage:
"V-Terminal" (3-17, Fig. 4) and "COM Terminal"
(3-18, Fig. 4)
Current:
The output plug of the inductive current probe (1 AC mV
per 1 ACA connect to the "Clamp-On Current Input
Terminals" (3-20, Fig. 4)
Fig. 3
-36-