Maintenance - PeakTech 2510 Bedienungsanleitung

3. " > Button " (3-14, Fig. 1) is used to select the digit.
4. " ^ Button " (3-13, Fig. 1) is used to select the value (0, 1, 2, ...9) of each digit.
5. The buzzer will alarm when the Watt alarm setting value is larger than the max.-
value or smaller than the min.-value.

8. Maintenance

Caution !
Risk of electric shock !
Remove all test leads before opening the battery cover !
8.1. Battery Replacement
1. When the LCD display shows the "BAT" symbol, it is necessary to replace the
batteries.
2. Loose the screw, slide the battery cover (3-23, Fig. 1) away from the instrument
and remove the batteries.
3. Replace the 1,5 V AA (UM-3) battery (6 pcs.) and reinstate the cover.
Batteries, which are used up dispose duly. Used up batteries are hazardous
and must be given in the for this being supposed collective container.
Statutory Notification about the Battery Regulations
The delivery of many devices includes batteries, which for example serve to operate
the remote control. There also could be batteries or accumulators built into the
device itself. In connection with the sale of these batteries or accumulators, we are
obliged under the Battery Regulations to notify our customers of the following:
Please dispose of old batteries at a council collection point or return them to a local
shop at no cost. The disposal in domestic refuse is strictly forbidden according to the
Battery Regulations. You can return used batteries obtained from us at no charge at
the address on the last side in this manual or by posting with sufficient stamps.
-38-