PeakTech 2510 Bedienungsanleitung Seite 26

4.2. Electrical Specifications (23 ± ± ± ± 5° C)
4.2.1. Watt (AC, true power), current mode from direct input
Range
6,000 Watt
* Accuracy is specified under the following conditions:
a) AC input current is ≥ 0,05 A AC & ≤ 10 A AC
b) AC input voltage is within 110 V ± 15% and 220 V ± 15% (50/60 Hz)
c) Power factor ≥ 0,5
* ACA, ACV frequency response is from 40 to 400 Hz
* Max. volt & current input signal value:
Volt input: Max. AC 600 V, Current input: Max. AC 10 A
4.2.2. Watt (AC, true power), current input cooperate with inductive probe or CT
Range
0,1 to 999,9 Watt
9,999 Watt
99,99 kWatt
999,9 kWatt
* Accuracy will be same as the above "Direct current input mode" but plus the
accuracy value of Current Transformer (CT) or the accuracy of Inductive Current
Probe.
* Input current should obey:
Input Probe - ≥ 20 A AC
CT 100/5 A - ≥ 8 A A AC
CT 1000/5 A - ≥ 80 A AC
4.2.3. VA (AC, Apparent Power), current mode from direct input
Range
99,99 VA
999,9 VA
9,999 VA
Resolution
0,1 Watt (<1000 W)
1 Watt (≥1000 W)
Resolution
0,1 Watt
1 Watt
0,01 kWatt
0,1 kWatt
Resolution
0,01 VA
0,1 VA
1 VA
-25-
Accuracy
± 1,5% + 5 dgt.
Accuracy
± 2% + 2 dgt.