The Timer Function; Switching The Timer Function On; Changing The Set Cooking Time; Calling Up The Current Cooking Time - Electrolux EHS 602 P Gebrauchsanweisung

The Timer Function

This function makes cooking easier for you. You don't
have to remain close to the cooking zone throughout
the whole cooking process: the cooking zone will be
automatically switched off at the selected time.
When no cooking zone has been programmed, the ti-
mer function can be used as an «egg–timer» (see
«The Timer Function as an Egg–timer chapter»).
Switching the Timer
function on
1. The desired cooking zone must be activated.
The dot (13) must be lit in the respective cooking
zone.
2. Select a power level between 1–9.
3. Press the Timer key (7).
The timer display (8) now shows «00».
4. Using the increase/decrease controls (5/4), enter
the cooking time desired (01 to 99 minutes).
The Timer function starts automatically after a few se-
conds.
The control lamp (11) lights up at each cooking zone
that has been programmed with the timer.
To enter the cooking time more quickly, hold
down either the increase or decrease controls
(5/4) respectively.
Changing the set coo
king time
The cooking time can be subsequently changed where
necessary:
1. The desired cooking zone must be activated
The dot (13) must be lit in the respective cooking
zone.
2. Press the Timer key (7).
3. Using the increase/decrease controls (5/4), select
a new cooking time.
To enter the cooking time more quickly, hold
down either the increase/decrease controls
(5/4) respectively.
Calling up the current
cooking time
– To call up the programmed cooking time remaining
for the respective cooking zone, press the corres-
ponding cooking zone key (2).
11
8
4
5
7
13
12
11 9
1
39