Tv And Video Recorder; Playback Ntsc; Search For And Store The Test Signal Of The Video Recorder; Camera And Camcorder - Dual DTFT 27-2 N Bedienungsanleitung

Connect a decoder without an aerial
socket to the TV
• Connect the decoder to your TV with a
eurocable (RCA Jack Cable) to EXTERNAL
(RCA Jack) (optional). When your decoder
has a Euroconnector / RCA Jack you can
obtain better picture quality if you connect a
eurocable (RCA Jack Cable) to EXTERNAL
(RCA Jack) (optional).

TV and Video Recorder

• Connect the aerial cables.
Better picture quality can be obtained if you
also connect a eurocable to EXTERNAL
socket (optional).

Playback NTSC

Connect NTSC VCR player to one of the two
Euroconnectors at the back of the TV.
Then, press " " button to select AV-1 or
AV-2.
Search for and store the test signal
of the video recorder
• Unplug the aerial cable from the aerial
socket "ANT" of your video recorder.
• Switch on your TV and put the video recorder
on the test signal. (See the handbook for
your video recorder.)
• Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. See Install,
Search and Store TV channels. Store the
test signal under programme number 0.
– Replace the aerial cable in the aerial
socket "ANT" of your video recorder once
you have stored the test signal.

Camera and Camcorder

To connect to (AV-3) input
Connect your camera or camcorder to the
right side of your TV.
• Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
inputs. You should connect the jacks to the
input in the same colour.
ENG-2707W-1543 UK-27 INCH TFT (17MB08)-DUVAR MON-(WO PIP)(CHI MEI-B1).p65
Connect the decoder to the video
recorder
Some video recorders have a special
euroconnector for decoder.
• Connect a eurocable to the euroconnector of
y o u r d e c o d e r a n d t o t h e s p e c i a l
euroconnector of your video recorder. See
also the handbook of your video recorder.
• To connect your video recorder to the TV, see
TV and Video Recorder section.
If you want to connect more equipment to
your TV, consult your dealer.

Connecting Headphones

Use the stereo headphone socket on the
right side of your TV, to connect head-
phones.

Connecting the PC

Connect PC monitor with 15-pin PC cable to
the 15-pin connector on the rear of the com-
puter. For detail installation procedure see
Installation in PC mode.
To connect to S-Video input
Connect your camera or camcorder to the
right side of your TV.
• Connect your equipment to the TV via S-
Video input at the right side by using S-
Video cables.
- 26 -
26 30.05.2006, 16:36