Feature Menu - Dual DTFT 27-2 N Bedienungsanleitung

Setting Picture Mode:
• Using " " or " " button select Picture Mode.
• Press " " or " " button to set Picture Mode.
Picture Mode can be set to Auto, 4:3, 16:9,
Cinema, Subtitle, Zoom or Panorama.
Picture
4:3
Setting Noise Reduction
• Using " " or " " button select Noise Re-
duction.
• Press " " or " " button to select Noise Re-
duction level "Off" or "Minimum" or "Me-
dium" or "Maximum" then select "store" and
press " " or " " button to save your setting.
Note 1:
At low signal level, the changings on the Noise Reduction
function are not effective when there is menu on the
screen. If the menu is removed, the effect of this func-
tion is seen. At normal broadcasting, Noise Reduction
changings are effective at once.
Note 2:
At moving pictures, while Noise Reduction is at maximum
level, some picture distortions may occur. If Noise Reduc-
tion is set to medium or minimum, the picture will improve.
Picture
Medium
Setting Hue
(During Playback NTSC system, this will ap-
pear in AV mode only when NTSC video
source is applied. Otherwise, HUE option is
invisible in Picture menu.):
ENG-2707W-1543 UK-27 INCH TFT (17MB08)-DUVAR MON-(WO PIP)(CHI MEI-B1).p65
• Using " " or " " button select Hue.
• Press " " button to increase hue level.
• Press " " button to decrease hue level.
Center value is indicated with one arrow.
To Store the Settings
• When the cursor is on any item which has
no sub-menu press "OK" button on the re-
mote control to store the settings directly.
or,
• Press " ", " " or "OK" button on Store op-
tion to store Picture menu settings.

Feature Menu

• To enter the Feature menu directly, press the
Yellow button, or
• Press "M" button, now you are in main menu.
In the main menu, select Feature by using
" " or " " button. Then enter the Feature
menu by pressing " " / " " or "OK" button.
- 15 -
15
Picture
Picture
Stored
Menu
30.05.2006, 16:36