Programme Menu - Dual DTFT 27-2 N Bedienungsanleitung

Installation menu in AV mode is as
follows.
Install.
ON

Programme Menu

• To enter Programme menu directly, press
the " " button in TV mode, or
• Press "M" button, now you are in main
menu. In the main menu, select "Program."
by using " " or " " button. Then enter the
Programme menu by pressing " " / " " or
"OK" button.
Menu
Moving cursor to four direction you can reach 20
programmes in the same page. By scrolling
the pages up or down by pressing the naviga-
tion buttons you can select all the programmes
in TV mode (except the AV mode).
By cursor action, programme selection is
done automatically. In order to select
programme is also possible by using digit
or double-digit button. In this way program-
me selection gets also automatically. The
TV Status is changed by the programme se-
lection too. When using double-digit button
in order to s elect a program me, the
Programme Number in TV Status OSD is
displayed in "P -- " form, and by pressing
digit buttons they are displayed in it.
Programme Number is between 00 and 99.
Programme Name has a name string with 4
characters. After autostore process the Pro-
gramme Names are set to:
• Channel search "C-01" or "S-01" (band
and channel number) or name of the tuned
channel if defined.
ENG-2707W-1543 UK-27 INCH TFT (17MB08)-DUVAR MON-(WO PIP)(CHI MEI-B1).p65
At the bottom of the menu there is a program-
me sort functions section. Each function is
activated by colour button (seen above).
Name allows changing the programme
name. By Delete you can delete programmes
that you decided. Insert section is for insert-
ing programmes into another programme
spaces. By selecting Autostore section,
Autostore menu will be available.
Name:
To change the name of a decided program-
m e, that programm e is selec ted and
pressed to the Red button (Name). The first
letter begins to blink on the selected name.
To change that letter " " or " " button can be
used, and to select the other letters, " " or
" " button can be used. If the cursor is at the
last letter of the Programme Name, pressing
" " button moves the cursor at the begin-
ning. On the contrary, if the cursor is at the be-
ginning of the Programme Name, pressing
" " button moves the cursor at the end.
After changing the name by pressing the
Red button (Store ) it is stored. After
activating the name process the "Insert",
"Delete" and "Autostore" processes will be
inactive and "Cancel" option will be valid.
This option cancels the name process, if the
new name do not want to be stored. To
cancel option is activated by pressing Blue
button.
- 18 -
18
Program. P 02
Name Insert
Delete Autostore
Store
Cancel
30.05.2006, 16:36