Switching The Tv On/Off; To Switch The Tv On; To Switch The Tv Off; Operating The Tv - Dual DTFT 27-2 N Bedienungsanleitung

NOTE: Remove the batteries from remote
control handset when it is not to be used for
a long period.Otherwise it can be damaged
due to any leakage of battery.

Switching the TV ON/OFF

To switch the TV on

Your TV will switch on in two steps:
1- Connect the power supply cord to the sys-
tem. Press On/Off switch at the rear of the
TV. Then the TV switches itself to stand-by
mode and the led becomes red located on
the front of the TV.
2- To switch on the TV from stand-by mode
either:
Press the " " button on the remote control,
or,
Press a digit button on the remote control so
that a programme number is selected,
or,
Press "-P/CH" or "P/CH+" button on the top
of the TV or press "-P/CH" or "P/CH+" button
on the remote control, so that last switched
off programme is selected.
By either ways the TV will switch on and the
led becomes green.

To switch the TV off

• Press the " " button on the remote control,
so the TV will switch to stand-by mode and
the GREEN LED will become RED,
or,
ENG-2707W-1543 UK-27 INCH TFT (17MB08)-DUVAR MON-(WO PIP)(CHI MEI-B1).p65
Press the "
the TV, so the TV will switch off and the
GREEN LED will become RED.
To power down the TV completely, press
On/Off switch, or
unplug the power cord from the mains socket.

Operating the TV

You can operate your TV using both the
remote control handset and onset buttons.
A.P.S.(AutomaticProgrammingSystem)
"All Prestored Programmes Will Be Erased"
message will be displayed when you turn
your TV on for the first time. APS, searches
and sorts all channels and stores them auto-
matically on your TV, according to the trans-
mission of programme systems in your area.
To cancel APS before starting, press "
button. First of all choose the "Country".
This, will effect the sort process in APS. By
pressing the " " or " " button, come to the
"Language" item and select the language in
which the menus of the TV will appear. As
soon as you change the language, the
menu items will be displayed in the selected
language. To select "Continue" use " " or
" " button and press " " or " " button.
After APS is finalized, a programme list will
appear on the screen. In the programme list
you will see the programme numbers and
names assigned to the programmes.
If you press the "
the A.P.S. is running, the A.P.S. will be
- 9 -
9
" button located on the top of
Warning
All Prestored Programmes
Will Be Erased
Country
Language
Continue
Cancel
A.P.S. Is Running
Please Wait
" button at any time while
30.05.2006, 16:36
"